This C-TEC CFP704-2 fire alarm panel helps reduce installation costs as only two-wire are needed. This system will only work with AlarmSense devices which include sounders, beacons, sounders, callpoints and fire and heat fire detectors
Most standard conventional fire detection systems have been designed to be cabled with two pairs of wires installed per zone, two cores of wire for heat, smoke sensors and call points, the other two cores for strobes, sounders and bells.
By ingeniously using different voltage bands for alarm and quiescent conditions, the AlarmSense enabled devices can make use of the same two wires of fire cable when used in conjunction with the C-TEC CFP704-2 (fire alarm panel 2 Wire). This clever use of technology allows the fire alarm panel to control and power devices using just two wires, this makes system design less complicated and can reduce labour cost's by 20-25% compared to a four wire system.
This C-TEC CFP704-2 Alarmsense Four Zone Two Wire system can be used in Houses of Mulitiple Occupation as it conforms to the necessary standards. For more details regarding specification and for BS standards please refer to the manufacturers datasheet for this product
The C-TEC CFP704-2 Two Wire Alarmsense fire panel can be mounted flush or surface depending on the installation, this unit has an up to date modern look that's ideal for commercial, apartment blocks or retail units. This alarm panel can be fitted with two 3.2A 12V VRLA Valve Regulated Lead Acid Batteries
This reliable, cost effective feature packed two wire fire alarm panel has four AlarmSense zones, 4 sounder circuits, a integrated 1.5A Energy efficient switch mode PSU, on-board fault and fire relays and 2 Remote and Reset open collector outputs. This unit is simple to use with colour coded buttons which are easy to follow